Stewart Collection of Victorian Cast Iron Gates & Railings

A range of cast iron gates and railings

Dimensions of Stewart cast iron gates and railings

 

The drawings below show the options available.      You can mix and match!

It is recommended that an intermediate railing post is used approximately every 3.0 metres.

It is also recommended that a railing stay is fitted approximately every 3.0 metres.

A joiner panel is required to connect to each intermediate railing post on one side only.

No joiner panels are required if connecting to piers.

A root fixing post is required if installing an automated gate system.

A hinge and pivot set is required for base plate fixing posts.

GA006

Stewart Cast Iron Driveway Gate Leaf

12ft pair weighing 450kg

 

GA005

Stewart Cast Iron Pedestrian Gate

10ft pair weighing 370kg

 

GA007

Stewart Cast Iron Pedestrian Gate

885mm wide weighing 117kg

 

Stewart GA006 cast iron twelve foot wide driveway gates

Stewart GA005 cast iron ten foot wide driveway gates

Stewart GA007 900mm wide cast iron pedestrian gate

GA008A

Stewart Half Height Railing Panel

weighing 20.5kg

 

GA017A

Stewart Half Height Railing Joiner Panel with Feet

weighing 10kg

 

GA003

Stewart Half Height Railing Post

weighing 23kg

 

Stewart GA008A half height Victorian cast iron railing panel

Stewart GA017A half height Victorian cast iron railing joiner panel with feet

Stewart GA003 half height Victorian cast iron railing post

GA009

Stewart Full Height Railing Panel with Root Fixing

weighing 24kg

 

GA018

Stewart Full Height Railing Joiner Panel with Root Fixing

weighing 18kg

 

GA002

Stewart Full Height Railing Post

weighing 38.5kg

 

Stewart GA009 cast iron railing panels

Stewart GA018 Victorian railing joiner panel

Stewart GA002 cast railing post

DISCLAIMER: ALL MEASUREMENTS ARE APPROXIMATE AND MAY VARY SLIGHTLY DUE TO THE NATURE OF MANUFACTURE.