Gilberton Collection of Victorian Cast Iron Gates & Railings

A range of cast iron gates and railings

Dimensions of Gilberton cast iron gates and railings

 

The drawings below show the options available.      You can mix and match!

It is recommended that an intermediate railing post is used approximately every 3.0 metres.

It is also recommended that a railing stay is fitted approximately every 3.0 metres.

A joiner panel is required to connect to each intermediate railing post on one side only.

No joiner panels are required if connecting to piers.

A root fixing post is required if installing an automated gate system.

A hinge and pivot set is required for base plate fixing posts.

GA012

Gilberton Cast Iron Driveway Gate Leaf

12ft pair weighing 464kg

 

GA011

Gilberton Cast Iron Driveway Gate Leaf

10ft pair weighing 420kg

 

GA010

Gilberton Cast Iron Pedestrian Gate

900mm wide weighing 128kg

 

Gilberton GA012 cast iron twelve foot wide driveway gates

Gilberton GA011 cast iron ten foot wide driveway gate leaf

Gilberton GA010 900mm wide cast iron pedestrian gate

GA013A

Gilberton Railing Panel with Feet

weighing 40kg

 

GA129A

Gilberton Joiner Railing Panel with Feet

weighing 26kg

 

GA130

Gilberton Railing Post

weighing 15kg

 

Gilberton GA013A railing panels with feet

Gilberton GA129A Victorian cast iron railing joiner panel

Gilberton GA130 Victorian reproduction railing post

DISCLAIMER: ALL MEASUREMENTS ARE APPROXIMATE AND MAY VARY SLIGHTLY DUE TO THE NATURE OF MANUFACTURE.